Busca Cuerda Honda, Eslinga De Elevación, Cuerda De La Cuerda Del Ojo en el directorio Industry, Reliable fabricante / proveedor / fábrica de China
Modelo: TS-RS
 | An appropriately sized Tandem Stopper Assembly is the only recommended midspan termination technique for Unitrex. When configured as described on our instruction document, the Tandem Stopper Assembly is rated to the full working load of the underlying Unitrex strength member. Currently there is no other technique that is recommended by Yale for a midspan termination of Unitrex at the full working load. Other conventional termination devices/techniques have been demonstrated to cause an unacceptable amount of damage to Unitrex when tested. The Tandem Stopper Assembly consists of two Unitrex Stoppers tethered together by an intermediate Ultrex sling. Both Stoppers are to be installed in an identical manner, positioned approximately five feet apart and both arranged with the eyes in the direction of the pull. The connecting sling provides the final connecting point for attaching the system to an appropriate tensioning device or anchor. The Tandem Stopper Assembly will be packaged to include all necessary materials and hardware for installation, including a single shackle matched to the total assembly working load. This shackle provides the best possible attachment point to the connecting sling, allowing the load to be evenly shared between the two applied Stoppers. When applied and sized correctly, a Tandem Stopper Assembly is rated to the full working load of the underlying Unitrex (see load rating table below). |
| Unitrex Diameter | Working Load | ||
|---|---|---|---|
| Inches | (mm) | Lbs | Kg |
| 0.44 | (11) | 5,000 | 2,270 |
| 0.53 | (13) | 6,500 | 2,950 |
| 0.58 | (15) | 8,500 | 3,855 |
| 0.63 | (16) | 10,625 | 4,820 |
| 0.71 | (18) | 12,625 | 5,730 |
| 0.84 | (21) | 18,375 | 8,340 |
| 1.00 | (25) | 25,000 | 11,350 |
| 1.15 | (29) | 31,250 | 14,185 |
Grupos de Producto : Soluciones de elevación
